JVC XV-THS8 ユーザーズマニュアル

• When you change the positioning of the speakers or listener, or 

replace the supplied speakers with other ones, perform Smart 
Surround Setup again.

7 While DVD is selected as the source and stopped

“SETTING UP” flashes on the display window.

Press ENTER, press Cursor Y/5 to 
select the distance between the front 
speakers and the listening position, 
then press ENTER.

Press Cursor Y/5 to select START, 
then press ENTER.

The system detects your clapping sound through the satellite 
speakers, then automatically makes the best settings for each 
speaker. “COMPLETED !” appears on the TV screen when 
Smart Surround Setup completes.

When “FAILED !” appears on the TV screen
The system could not detect the clapping sound correctly. In such a 
case, follow the instructions that appears on the TV screen.
• When the system detects the clapping sound as “FAILED !” three 

times, set the distance (DISTANCE) and the output level 
(LEVEL) manually (

A pg. 37).

To cancel
Press SMART S.SETUP.

• You need to set the subwoofer’s output level (LEVEL) manually. 

(

A pg. 18)

• In step 2, “SW ERROR” appears on the display window if the center 

unit and the powered subwoofer are not connected correctly by using 
the supplied system cord.

See page 16 for button locations.

TH-S8-S5-S51[B].book  Page 19  Friday, March 12, 2004  6:37 PM