JVC FS-H35 ユーザーズマニュアル
7
1
Connect the AM loop antenna to the
AM LOOP terminals as illustrated.
AM LOOP terminals as illustrated.
2
Turn the AM loop antenna until you
have the best reception.
have the best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered
wire to the AM EXT terminal and extend it
horizontally. The AM loop antenna must remain
connected.
wire to the AM EXT terminal and extend it
horizontally. The AM loop antenna must remain
connected.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the power cord.
AM antenna
Vinyl-covered wire
(not supplied)
AM loop antenna
(supplied)
1
2
Connecting Speakers
1
Press and hold the clamp of the
speaker terminal on the rear of the
unit.
speaker terminal on the rear of the
unit.
2
Insert the end of the speaker cord into
the terminal.
the terminal.
Match the polarity between the unit and the
speaker terminals:
speaker terminals:
ª to ª and · to ·.
3
Release your finger from the clamp.
• DO NOT connect speakers while the
power is on.
• DO NOT connect more than one speaker
to each speaker teminal.
IMPORTANT: Use only speakers with the same
speaker impedance as shown on the speaker
terminals on the rear of the unit.
speaker impedance as shown on the speaker
terminals on the rear of the unit.
Speaker cord
Speaker cord
Right speaker
Left speaker
1
2
EN01-13_FS-H30[J]f.pm6
03.2.5, 4:31 PM
7