JVC FS-H35 ユーザーズマニュアル
21
4
Select the timer (Daily
Timer or Recording Timer)
with the source to play.
Timer or Recording Timer)
with the source to play.
On the remote control:
Press
Press
UP or
DOWN to
select the timer, then press
CLOCK/TIMER.
CLOCK/TIMER.
On the unit:
Press
Press
¢ or 4 to select the
timer, then press TIMER/SNOOZE.
• Each time you press
UP
(
¢) or DOWN (4), the
timer mode and the source
change as follows:
change as follows:
TUNER :
tunes in to the last station you were
listening to. (Daily Timer)
REC
TUNER :
records the last station you were
listening to. (Recording Timer)
• Put a recordable cassette into the deck.
• Put a recordable cassette into the deck.
CD :
plays a disc. (Daily Timer)
• Load a disc.
• Load a disc.
TAPE :
plays a tape. (Daily Timer)
• Make sure that the tape is in the cassette
deck.
• Make sure that the tape direction is
correct.
The unit enters the volume level setting mode.
5
Select the volume level.
On the remote control:
Press
Press
UP or
DOWN to set the volume level,
then press CLOCK/TIMER.
On the unit:
Press
Press
¢ or 4 to set the volume level, then
press TIMER/SNOOZE.
• You can select the volume level
• You can select the volume level
(“VOLUME – –” and “VOLUME 0” to
“VOLUME 40”).
If you select “VOLUME – –,” the volume is set
to the previous level when the unit was turned
off.
“VOLUME 40”).
If you select “VOLUME – –,” the volume is set
to the previous level when the unit was turned
off.
• To turn off the volume while the Recording
Timer (
REC
TUNER
) is working, set the volume
level “VOLUME 0.”
The unit enters the clock setting mode.
TUNER
TUNER
REC
CD
TAPE
6
Adjust the clock if you need.
• See “Setting the Clock” on page 10.
7
Press STANDBY/ON
(or
(or
on the unit) to turn
off the unit (standby) if you
have set the timer with the
unit turned on.
have set the timer with the
unit turned on.
• When the timer turns on the unit, the
(timer)
indicator starts flashing. (If the Recording Timer
is selected in step
is selected in step
4
, the
REC
indicator also
starts flashing.)
To deactivate the timer temporarily,
press and hold CLOCK/TIMER (or
TIMER/SNOOZE on the unit) until
the
press and hold CLOCK/TIMER (or
TIMER/SNOOZE on the unit) until
the
(timer) indicator on the display
goes off.
To activate or change the timer
(with the previous setting), follow
steps
(with the previous setting), follow
steps
1
to
7
on pages 20 and 21.
• If you want to change the timer setting after the
Daily Timer be used, first deactivate the timer.
• If the unit is turned on when the timer on-time comes
Timer does not work.
• When you unplug the power cord or if a power failure
occurs
The timer will be canceled. You need to set the clock first,
then the timer again.
The timer will be canceled. You need to set the clock first,
then the timer again.
STANDBY/ON
UP
DOWN
CLOCK
/ TIMER
TIMER/SNOOZE
CLOCK
/ TIMER
TIMER/SNOOZE
EN18-26_FS-H30[J]f.pm6
03.2.5, 5:01 PM
21