JVC FS-GD7 ユーザーズマニュアル
34
PICTURE SOURCE
You can obtain optimal picture quality by selecting an
appropriate option—picture source type (either video source
or film source).
appropriate option—picture source type (either video source
or film source).
Select one of the following:
SCREEN SAVER
You can activate or deactivate screen saver while operating
the built-in disc player.
the built-in disc player.
Select one of the following:
FILE TYPE
If both audio tracks (MP3 files) and still pictures (JPEG
files) are recorded on a disc, you can select which to play.
files) are recorded on a disc, you can select which to play.
Select one of the following:
7
AUDIO Setup Menu
You can adjust the sound settings of the System.
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this
correctly according to the connected component.
correctly according to the connected component.
Select one of the following:
• See also “OPTICAL DIGITAL OUT Signals” on page 42.
DOWN MIX
When using the digital output on the rear, set this correctly
according to the connected component.
When playing a multi-channel DVD, the System converts
the signals into 2 channels properly.
according to the connected component.
When playing a multi-channel DVD, the System converts
the signals into 2 channels properly.
Select one of the following:
AUTO:
Normally select this.
When playing back a disc containing both video
and film sources, the System automatically
changes the processing to match it to the picture
type (film or video source) of the current chapter.
When playing back a disc containing both video
and film sources, the System automatically
changes the processing to match it to the picture
type (film or video source) of the current chapter.
FILM:
To play a film source disc.
VIDEO:
To play a video source disc.
ON:
The picture on the TV screen becomes dark when
no operation is done for about 5 minutes.
no operation is done for about 5 minutes.
OFF:
To cancel the screen saver.
AUDIO:
To play MP3 files.
STILL PICTURE:
To play JPEG files.
PCM ONLY:
To connect to a linear PCM digital
equipment.
equipment.
DOLBY DIGITAL
/PCM:
/PCM:
To connect to a Dolby Digital decoder
or an amplifier with a built-in Dolby
Digital decoder.
or an amplifier with a built-in Dolby
Digital decoder.
STREAM/PCM:
To connect to a DTS decoder or an
amplifier with a built-in DTS decoder.
amplifier with a built-in DTS decoder.
DOLBY
SURROUND:
SURROUND:
To connect an amplifier with the Dolby
Pro Logic decoder.
Pro Logic decoder.
STEREO:
To connect a conventional stereo
amplifier, receiver, MD recorder, etc.
amplifier, receiver, MD recorder, etc.
STREAM/PCM
AUTO
AUDIO
DIGITAL AUDIO OUTPUT
D. RANGE COMPRESSION
DOLBY SURROUND
DOWN MIX
USE TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
TO EXIT, PRESS [SET UP].
ENTER
SELECT
FS-GD7[J]_EN.book Page 34 Tuesday, April 5, 2005 10:45 AM