JVC EX-A10 ユーザーズマニュアル
46
Ref
e
rence
7
Important cautions
Installation of the system
• Select a place which is level, dry and neither too hot
• Select a place which is level, dry and neither too hot
nor too cold; between 5°C and 35°C.
• Leave sufficient distance between the system and the
TV.
• Do not use the system in a place subject to vibration.
Power cord
• Do not handle the power cord with wet hands!
• A small amount of power is always consumed while
• Do not handle the power cord with wet hands!
• A small amount of power is always consumed while
the power cord is connected to the wall outlet.
• When unplugging the power cord from the wall outlet,
always pull on the plug, not the power cord.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything
• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart,
• Do not use any non-standard shape disc (like a heart,
flower or credit card, etc.) available on the market,
because it may damage the system.
because it may damage the system.
• Do not use a disc with tape, stickers, or paste on it,
because it may damage the system.
Note about copyright laws
Check the copyright laws in your country before
recording from DVDs, VCDs, SVCDs and CDs.
Recording of copyrighted material may infringe copyright
laws.
Check the copyright laws in your country before
recording from DVDs, VCDs, SVCDs and CDs.
Recording of copyrighted material may infringe copyright
laws.
Note about copy guard system
DVDs are protected by copy guard system. When you
connect the system to your VCR directly, the copy guard
system activates and the picture may not be played back
correctly.
DVDs are protected by copy guard system. When you
connect the system to your VCR directly, the copy guard
system activates and the picture may not be played back
correctly.
7
Safety precautions
Avoid moisture, water and dust
Do not place the system in moist or dusty places.
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not
place it near a heat source.
Do not expose the system to direct sunlight and do not
place it near a heat source.
When you are away
When away on travel or for other reasons for an extended
period of time, disconnect the power cord plug from the
wall outlet.
When away on travel or for other reasons for an extended
period of time, disconnect the power cord plug from the
wall outlet.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents including disinfectants. These may cause
deformation or discoloring.
When cleaning the system, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents including disinfectants. These may cause
deformation or discoloring.
Care of the disc tray
When cleaning the disc tray, gently wipe the dirt off the
surface with a soft cloth dampened with a small amount
of a neutral detergent diluted with water, preventing the
discoloration and damage to its surface.
When cleaning the disc tray, gently wipe the dirt off the
surface with a soft cloth dampened with a small amount
of a neutral detergent diluted with water, preventing the
discoloration and damage to its surface.
If water gets inside the system
Turn the system off and disconnect the power cord plug
from the wall outlet, then call the store where you made
your purchase. Using the system in this condition may
cause fire or electrical shock.
Turn the system off and disconnect the power cord plug
from the wall outlet, then call the store where you made
your purchase. Using the system in this condition may
cause fire or electrical shock.
7
When condensation or water drops adhere to the lens
In any of the following cases, condensation or water
drops may adhere to the lens, preventing the system
from working properly:
• Immediately after room heating starts
• When the system is installed in a steamy or damp
drops may adhere to the lens, preventing the system
from working properly:
• Immediately after room heating starts
• When the system is installed in a steamy or damp
space
• When the system is suddenly moved from a cold place
to a warm space
In any of these cases, leave the system turned on for 1 or
2 hours before use.
2 hours before use.
Notes on handling
Paste
Sticker
Label sticker
Reference
Special cautions
• Manufactured under license from Dolby Laboratories. “Dolby”, “MLP Lossless”, and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS 2.0+DIGITAL OUT” are registered trademarks of Digital Theater Systems, Inc.
• This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
• This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
• “Official DivX Certified
TM
product”, “Plays DivX
®
5, DivX
®
4, DivX
®
3, and DivX
®
VOD video content (in compliance
with DivX Certified
TM
technical requirements)”, “DivX, DivX Certified”, and associated logos are trademarks of
DivXNetworks, Inc. and are used under license.
EXA10[A_Ux].book Page 46 Tuesday, August 30, 2005 3:53 PM