JVC EX-A10 ユーザーズマニュアル

You can set the clock when the receiver is turned
either on or off.
Example:
To set the clock to 10:30 a.m. on Wednesday

Slide the remote control
mode selector to
RECEIVER.

Press CLOCK/TIMER.

Display on the receiver

Press 2 or 3 (cursor) to select
the hour.

• Hold down the button to incrementally

increase the hour setting.

• You can also use the number buttons to

specify the hour. Refer to “Using the
number buttons” shown on the right.

Press SET.

Press 2 or 3 (cursor) to select
the minute.

• Hold down the button to incrementally

increase the minute setting.

• You can also use the number buttons to

specify the minute. Press SET.

Press SET.

Press 2 or 3 (cursor) to select
the day of the week.

• Hold down the button to change the setting

for the day of the week.

• Abbreviations are used for the days of the

week.

Sun.

→ Sunday

Mon.

→ Monday

Tue.

→ Tuesday

Wed.

→ Wednesday

Thu.

→ Thursday

Fri.

→ Friday

Sat.

→ Saturday

Press SET.

• The clock starts from 0 seconds in the

minute you set.

NOTE
• While setting the clock, you can return to the

previous step by pressing CANCEL.

• The time display on the receiver is a 24-hour clock.
• The clock will gain or lose about 1 minute per month.
• If the power cord of the receiver is disconnected

from the AC outlet or the power is interrupted, the
clock setting is stored for about 1 minute.

• You cannot set the clock when “DISPLAY OFF” is

selected. (

A page 16)

Adjusting the clock

Press CLOCK/TIMER twice to
display the clock, and then adjust
the clock starting from step 3.

Displaying the clock when using the
receiver

Press DISPLAY.

• Refer to “Changing the display in the display

window”. (

A page 26)

Setting the clock

Examples:

15:

→

150:

→

Basic operations (continued)

Using the number buttons

EXA10[B]-02.fm Page 15 Wednesday, August 24, 2005 10:28 AM