JVC DX-T5 ユーザーズマニュアル

 

• During slow-motion playback, no sound will be 

reproduced.

• You cannot use frame-by-frame playback for DVD-VR.
• While zoomed in, the picture may look coarse.

 

• While programming steps...

– Your entry will be ignored if you have tried to program 

an item number that does not exist on the disc (for 
example, selecting track 14 on a disc that only has 12 
tracks).

– For SVCD/VCD/CD loaded on the other tray than the 

current one, the System may prompt for the group 
number entry as well, however, these entries will be 
ignored during playback.

• You cannot use Program Play and Random Play for DVD-

VR/JPEG discs.

• The programmed contents will remain until you erase it.
• While the PROGRAM indicator is on, you cannot change 

the disc to play. (DISC 1 – 5 on the remote control and 

3

 

 

on the main unit do not work.) 

 

• A-B Repeat:

– A-B Repeat cannot be used on some DVDs.
– A-B Repeat is possible only within the same title or 

within the same track.

 

• For DVD-VR playback...

–

 

 The System can play back the 

original picture in the recorded order.

–

 

 The System can play back the play list edited 

by the recording equipment. The control screen for the 
play list appears only when the disc has the play list.

– Resume is not available.
– For details about DVD-VR format and play list, refer to 

the manual of the recording equipment.

• For JPEG files playback...

– It is recommended that you record a file at 640 x 480 

resolution. (If a file has been recorded at a resolution of 
more than 640 x 480, it will take a long time to be 
shown.) 

– This System can play only baseline JPEG files*. 

Progressive JPEG files* or lossless JPEG files* cannot 
be played.
* Baseline JPEG format:

Used for digital cameras, 
web, etc. 

Progressive JPEG format: Used for web.   
Lossless JPEG format:

An old type and rarely used 
now.

• This System can play back JPEG files with the extension 

code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).

• This System may not play back JPEG files properly if they 

are recorded on the devices other than digital still camera.

• During slide-show playback, zoom cannot be operated.

 

• You cannot change the source during recording.
• There is leader tape which cannot be recorded onto at the 

start and the end of cassette tapes. Thus, when recording 
discs or radio broadcasts, wind the leader tape first to 
ensure that the recording will be made without any music 
part lost.

• If no cassette is inserted or a protected tape has been 

inserted, “NO REC” appears on the display.

• If you select the Surround Mode (DANCE, HALL, 

STADIUM—see page 13), you can also record the 
surround elements. (Other sound adjustments do not affect 
the recording level.)

 

• When using Reverse Mode for recording, start recording in 

the forward (

3

 

) direction first; otherwise, recording will 

stop when only one side (reverse) of the tape is recorded.

 

• Recording starts from the first track even if you have 

selected a track by using 

¢

 

/

4

 

. To specify track(s) to 

record, program them (or use One Track Recording).

• While recording, you cannot use disc operation buttons 

(except for 

7

 

) and sound setting buttons (except for 

volume control).

• Everything on the disc goes onto the tape in the order on 

the disc, or according to the order you have made for 
Program Play.

• You cannot use Repeat Play while synchronized recording 

(Repeat Play will be canceled).

• DISC REC START button does not work:

– While playback is paused.
– When Random Play is activated.
– While playing back or being paused with Program Play.

• When the tape reaches its end in the forward direction (

3

 

) 

during recording, the last song will be re-recorded at the 
beginning of the reverse side (

2

 

).

• When the tape reaches its end in the reverse side (

2

 

) 

during recording, recording stops even though the disc is 
not entirely recorded.

EN_DX-T5[USUN].book Page 40 Tuesday, February 1, 2005 2:27 PM