Sharp MD-X8 ユーザーズマニュアル

H

H

H

H

H

Perform steps 1-5 of the "Tuning" section.

To receive FM stereo,  press the ST button so that the  “FM ST”
indicator on the display lights up for FM stereo reception, then
press the ENTER button.

Within 10 seconds, select the desired preset number with the
MULTI CONTROL button.

Within 10 seconds, press the ENTER button.

Repeat steps 1-4 to preset the other stations, or to change a
preset station.

I

When a new station is stored in a preset number location, the previous
contents of that location will be erased.

I

After a prolonged power failure, the contents of the memory will be
lost.  When power is restored, enter your selections in memory again.
(For power failures of just a few hours or less, the contents of memory
will not be lost.)

H

H

H

H

H

Press the direct  button on the remote control or MULTI CON-
TROL button to recall the preset channel number.

I

The contents (preset channel number, frequency and frequency
band) which have been stored in memory will appear in the display,
irrespective of the frequency bands.

I

If there are no stations memorized, this operation can not be per-
formed.

Press the >10 button first,then press the number.

For example to select 35:

1

 Press the >10 button.

2

 Within 5 seconds, press the "3" button.

3

 Within 5 seconds, press the "5" button.

I

You can create names for radio stations that have been stored in
memory.(Page 21)

FM stereo
indicator

Frequency

FM stereo
reception indicator

MULTI  CONTROL

TU

NI

NG

/CU

RSO

R

>

 

10

5

4

3

2

1

10/0

9

8

7

6

TUNING/CURSOR 

ENTER

TUNER

(BAND)

ST

BAND

*17-21

98.6.23, 0:11 PM

20