Anchor Audio AN-130F1+ ユーザーズマニュアル

MADE IN USA

SIX YEAR WARRANTY

AN-130+ Speaker Monitor Owners Manual

AN-130+ TECHNICAL SPECIFICATIONS

(Specifications Subject to Change Without Notice)

HAVING TROUBLE WITH YOUR SOUND SYSTEM?

CONDITION 

POSSIBLE CAUSE

No Sound 

(Power LED Not Lit)

 

• turn POWER switch on

 

• plug in power cord

No Sound 

(Power LED Lights)

 

• check for output from source

 

• make sure all cables are completely plugged in

 

• increase volume control

 

• press mute button on remote 

(AN-130RC+ only)

 

• turn power switch to off then back to on 

(AN-130RC+ only)

Distorted Sound 

• check input cable connection

 

• lower input signal level

Excessive Hum or Noise 

• use shielded input cables

No Sound 

• confirm transmitter power switch is set to on

 

• turn up volume control

 

• plug microphone into body-pack transmitter

 

• turn sound system on

 

• replace mic/transmitter battery

 

• make sure hands free mic cable is fully plugged into transmitter

 

• turn off mute by pressing, volume up/down or mute 

(AN-130+RC only)

Frequent Transmitter Dropouts 

• replace mic/transmitter battery

 

• move mic/transmitter closer to AN-130+

• change transmitter to different channel 

Rated Power 

Output 30 watts continuous

Max SPL @ Rated Power  103 dB @ 1 meter
Frequency Response 

65 Hz – 18 kHz ± 3 dB

Speaker Type 

4.5” woofer, 10 mm dome tweeter

AC Power Reqs. 

110 – 125 VAC, 50/60 Hz

 

50W max

      Export Model 

208 – 240 VAC, 50/60 Hz 

 

50W max

Fuse Rating 

T 1.0A / 250V

      Export Model 

T 0.5A / 250V (internally mounted)

Dimensions (HWD) 

5.25” x 8.4” x 9”  

 

(13 x 21 x 23 cm)

Weight 

8.5 lbs / 3.8 Kg

Inputs
Line 

Hi-Z, unbalanced, 1/4” & 1/8” jack

Microphone 

Lo-Z, unbalanced, 1/4” jack

Output
Line 

Lo-Z, buffered, 1/4” phone

Sensitivity For Rated Output
Line 

-20 dBV (100 mVrms)

Microphone 

-43 dBV (7.5 mVrms)

The Exclamation Symbol in the figure above appears in Warning and Caution 
tables throughout this document.  This symbol designates an area where 
personal injury or damage to the equipment is possible. 

The Electrical Shock Symbol in the figure above appears throughout this manual.  
This symbol indicates a hazard arising from dangerous voltage.  Any mishandling 
could result in irreparable damage to the equipment, and personal injury or 
death. 

The Electrical Shock Symbol in the figure above appears throughout this manual.  
This symbol indicates a hazard arising from dangerous voltage.  Any mishandling 
could result in irreparable damage to the equipment, and personal injury or 
death. 

The presence of the CE Mark on Anchor equipment means that it has been 
designed, tested and certified as complying with all applicable European Union 
(CE) regulations and recommendations. 

Electrical Shock Symbol

Figure  Protective Conductor 

Terminal Symbol 

This symbol on the product or on its packaging indicates that this product 
must not be disposed of with regular waste. Instead, it is the user responsibility 
to dispose of waste equipment according to the local laws. The separate 
collection and recycling of the waste equipment at the time of disposal will help 
to conserve natural resources and ensure that it is recycled in a manner that 
protects human health and the environment. For information about where the 
user can drop off the waste equipment for recycling, please contact your local 
Anchor representative. See Section for instructions on how to disassemble the 
equipment for recycling purposes.

Figure WEEE Directive Symbol