Anchor Audio Explorer Dual Basic Pack ユーザーズマニュアル

MADE IN USA

SIX YEAR WARRANTY

Explorer Pro Sound System Owners Manual

For System Setup & Operation Videos Visit Our Website:  www.anchoraudio.com

WARNING:  TO REDUCE THE RISK OF FIRE 

OR ELECTRIC SHOCK, DO NOT EXPOSE 

THIS EQUIPMENT TO RAIN OR MOISTURE.

BACK PANEL OF EXP-7500U2

BASIC SYSTEM OPERATION

IMPORTANT:  Make all connections with shielded 

cables to avoid hum, buzzing or interference.

1.  Set all Input Level Controls to minimum 

& Tones Controls to flat or the middle 
setting before turning your system on

2.  Plug a wired microphone into the MIC 

1 or MIC 2 jacks and/or plug an audio 
source into the LINE-IN jack

3.  Switch POWER to ON, the BATTERY LED 

will light

4.  Slowly increase the Level Control for the 

input jacks used to the desired volume

5.  Adjust BASS & TREBLE controls to 

desired sound quality

(see page 6)

LINE IN - INPUT JACKS
The 1/8” (3.5 mm) jack input is used to hook 
up an iPod, a portable CD/ MP3/ tape player, 
laptop computer, or similar external  
audio source
The 1/4” unbalanced input can be used for 
other communication devices including a 
mixer or daisy chaining together multiple 
Explorer speakers

SPEAKER OUT -  
OUTPUT JACK
Connect the system to a 
Explorer PRO unpowered 
companion speaker

MUSIC/ SPEECH BUTTON
In situations where you’re speaking to 
a larger crowd or in a noisy environ-
ment, just push the Music/Speech 
button in and give your voice an added 
boost
To return back to normal use, just push 
the Music/Speech button again

Balanced 1/4” – provides a combined 

output of all active system inputs

Record your presentation or connect to 

another powered sound system

VOICE OVER BUTTON
Push the “Voice Over” button in 
to have the music automatically 
lowered when you speak through a 
connected microphone
Music will return to original level 
when mic use/speaking stops

A solid red light on one of the 

RX Indicator Lights indicates 

that the sound system is getting 

good reception with the wireless 

microphone

A solid red light on both RX 

Indicator Lights indicates that 

the sound system is a optimum 

reception with the wireless 

microphone

Adjust knob to control  

wireless microphone levels

1.  Loosen the Lower Collar Knob
2.  Separate the stand legs until the leg support Cross 

Braces are parallel to the floor

3.  Tighten the Lower Collar Knob
4.  Loosen the Upper Collar Knob and extend the 

center pole

5.  Adjust height and retighten the Upper Collar Knob
6.  Place your Anchor sound system on the stand

SPEAKER STAND ADAPTER
The 1.5” diameter Speaker Stand 
Adapter lets you mount the 
Explorer on a speaker stand.

1.  Slide Speaker Stand Adapter 

into slot on Explorer PRO 
bottom

2.  Tighten screw to secure 

adapter

3.  Place unit on stand carefully
4.  Tighten screw on Adapter 

collar securing Explorer PRO 
on stand