Toshiba RD-XS32SC ユーザーズマニュアル

The recorder usually controls the Library database
system automatically. However, in the following cases,
you must maintain and create data manually.

• When you want to add information about a title, (for

example when you use a DVD-RAM disc recorded
on another device, etc.), to the Library system of the
recorder.
→ “Registering a disc manually” (

 page 144).

• When the Library database memory is full. (Up to

3000 entries can be registered. When you reach this
limit, a message will appear and further additions to the
Library database will be rejected. Erase unnecessary
data to make space.)
→ “Erasing unnecessary data” (

 page 145).

• When you want to rearrange the whole Library

information from the beginning.
→ “Deleting all the Library information only” (

 page

145).

• When you save the Library data in another DVD-

RAM disc.
→ “Saving the Library data in a DVD-RAM disc” (
page 146).

• When you import saved Library data back into the

recorder.
→ “Re-installing the backup data” (

 page 146).

Note
• Save your Library data on a DVD-RAM disc. Importing

Library data replaces all current database information in
the recorder, including any data added after you saved the
data onto a DVD-RAM disc.

then press ENTER.
A submenu appears.

To cancel, select “No”.

All title information is registered.

Notes
• To use title information in a DVD-RAM disc recorded on

another device, as the Library data of the recorder, be sure
to follow the procedure of “Registering a disc manually” to
add said data to the Library system. This information
cannot be added automatically.

• If you record content on a DVD-RAM disc on the recorder

and edit the content on the other device, Library data of the
disc may be lost or the disc may not function properly.

• Unless a DVD-RAM disc is registered to the recorder,

information of current or future titles recorded on the disc,
will not registered.

• By registering a disc manually, several discs in same

number consequently may be registered. In this case, the
remaining time is displayed per disc or page. Execution of
“Edit Disc Number” (

 page 143) is recommended.

e.g.