Toshiba RD-XS32SC ユーザーズマニュアル

Notes
• When a Reservation disc (

 page 49) is inserted in the

recorder, you cannot check the remaining volume of other
discs.

• The nearest 8 programs are calculated at a time.
• While the recorder is preparing for or executing a

programmed recording, any program modification cannot
be registered. Only programs which will start after 5
minutes or later can be modified.

• Available disc volume is not displayed for a DVD-R/RW

disc on which DVD-Video finalize process was executed.

To stop a programmed recording
To finish,
Press   on the front panel twice.
When you press it once, a message appears. While
the message is displayed, press the   button once
again.

To pause recording,
Press   on the front panel.
To resume recording, press it again.

QUICK MENU.
The Quick Menu appears.

Keeping the power on even after the
programmed recording finished
If the recorder turns itself on to execute a programmed
recording, it will turn itself off after finishing the
recording. You can restrict this and keep the recorder
powered on.

While a programmed recording has started, open
the lid of the remote control and press EXTEND.
The first press displays the programmed end time (in
the front panel display).

Each time you press the button, it is delayed 10
minutes, up to 60 minutes.

Notes
• Pressing a button except EXTEND in the above procedure

will set the currently selected delay.

• You cannot delay the end time of a programmed recording

which will end within 1 minute from the current time.

• Even if you delay the end time of a programmed recording,

the recording will stop when the disc is exhausted. Also it
will stop if 9 hours elapsed.