VIZIO VSB210WS ユーザーズマニュアル
Version 1/19/2009
17
www.VIZIO.com
Chapter 4
Chapter 4
Chapter 4
Chapter 4
Sett
Sett
Sett
Setting Up
ing Up
ing Up
ing Up
HD Sound Bar System
HD Sound Bar System
HD Sound Bar System
HD Sound Bar System/W
/W
/W
/Wireless
ireless
ireless
ireless S
S
S
Sub
ub
ub
ub-
-
-
-W
W
W
Woofer Setup
oofer Setup
oofer Setup
oofer Setup and
and
and
and
P
P
P
Pairing
airing
airing
airing
The HD Sound Bar System operates in unison with the Wireless Sub-Woofer. They
come already paired from the factory. Please follow the procedure below if pairing the
units is needed:
come already paired from the factory. Please follow the procedure below if pairing the
units is needed:
Figure 1 - Power and Input connections - HD Sound Bar System
1. Connect an Optical (SPDIF) cable from the Optical Output on the source device to the OPTICAL
input; or connect one end of the left and right channel audio cables to AUDIO-IN-1 or AUDIO-IN-2
on the back of the HD Sound Bar System, and the other end to the Audio Output of the signal
source. The Inputs are shown in the figure 1 above.
on the back of the HD Sound Bar System, and the other end to the Audio Output of the signal
source. The Inputs are shown in the figure 1 above.
2. Before connecting the AC cord to an outlet, connect the HD Sound Bar
System power adapter DC connector (Fig 1).
3. Before connecting the AC cord to an outlet, connect the Sub-Woofer
power adapter DC connector (Fig 2)
4. Connect the AC cords of the power adapter to suitable AC outlet.
5. Switch the HD Sound Bar System power to ON by either using the power
5. Switch the HD Sound Bar System power to ON by either using the power
button on the top of the HD Sound Bar System or the power button in the
remote control.
remote control.
6. Having both units turned on, press the LINK button on the back of the
Sub-Woofer, then press and hold the Input button on the HD Sound Bar
System for at least 5 seconds to have both units paired up and ready to
use. The LED on the front of the subwoofer will flash quickly. Once
pairing is requested,
the device will attempt for up to 30 seconds and then end the pairing mode.
System for at least 5 seconds to have both units paired up and ready to
use. The LED on the front of the subwoofer will flash quickly. Once
pairing is requested,
the device will attempt for up to 30 seconds and then end the pairing mode.
7.
Select the desired input by pressing the Input button on the Sound Bar or the
Remote. The default input is Analog 2 when the Sound Bar is first plugged in.
Refer to Page 8 for additional information.
Refer to Page 8 for additional information.
The following is a description of the Sub-Woofer LED blink codes:
On continuously:
A link is active.
Flashing slowly:
A link cannot be established.
Flashing quickly:
The wireless device attempting to pair.
Figure 2
Power
connection
and Link
Button on
Sub-Woofer