Panasonic SC-BT100 ユーザーズマニュアル

RQT9129

≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot, 

data may be written to the SD card. Erase the data by using “BD-Video Data Erase”, format 
the card or use a new card.

≥Data that can be played from an SD card are AVCHD and JPEG data.

≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.

≥Check that the iPod is connected firmly.
≥The battery of the iPod is depleted. Charge the iPod, and then operate again.

≥Make sure that TV is connected to the VIDEO OUT terminal on this unit.
≥Operate the iPod menu to make the appropriate video/photo output settings for your TV. 

(Refer to operating instructions for your iPod.)

≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.

≥Turn the TV off or move it away from the unit.

≥Separate the antenna from other cables.

≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Ensure that the wireless system is plugged into the house hold AC outlet and is turned on. 

Then, check that “

[W2S]” or “[W4S]” is displayed on the main unit’s display.

≥Ensure that surround selector at the rear of the wireless system is set to the center position.
≥Perform the steps bellow.

1 While pressing the [

9/5] on the main unit, press the numbered button [3] on the 

remote control until “P” lights in the main unit’s display.
≥The indicator on the wireless system turns green.

2 While “P” is displayed, press [I/D SET] on the rear of the 

wireless system.
≥If “P” goes off before you press [I/D SET], repeat step 1 

and then continue the procedure.

3 While pressing [

9/5] on the main unit, press the 

numbered button [3] on the remote control.
≥“[W2S]” or “[W4S]” lights on the main unit.

4 Turn off and on the wireless system.

≥Make sure the indicator on the wireless system lights up green.

≥There is a power supply problem. Consult the dealer.

≥This occurs between playlist chapters or scenes ([AVCHD]).
≥When playing a title recorded on both layers, the unit automatically switches between layers 

and plays the title in the same way as a normal program. However, video and audio may 
momentarily cut out when the unit is switching layers.

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is 

not defective.

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.

≥Confirm whether the disc supports

 

picture-in-picture.

≥Confirm whether the disc supports the virtual package.
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
≥Sub contents copied to an SD card are provided by the disc producer as a part of the 

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played 
as a virtual package.

≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on 

some discs. Use the disc’s menus to make changes.

≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.
≥When progressive output is on, closed captions cannot be displayed.

≥Turn off the subtitles or turn off the closed caption setting on the TV.

≥Angles can only be changed during scenes where different angles are recorded.

≥Memorized positions are canceled when

– pressing [

∫] several times.

– opening the disc tray.

≥The resume play function may not work depending on the disc.

I/D SET

Use a pointed 
object.

SC-BT100P-ENG.book  41 ページ  ２００８年２月２０日　水曜日　午後６時２２分