Creative 0404 ユーザーズマニュアル

4 - The PatchMix DSP Mixer

Mixer Strip Creation

E-MU Digital Audio System

23

3.

Choose one of the Send Outputs. Click on a destination to select it.

4.

Choose one of the Return Inputs. Click on a source to select it.

5.

Click OK to select the Send and Return or Cancel to cancel the operation.

This type of insert send breaks the signal at the insert point and sends it out to the 
selected ASIO Host Input destination (such as Cubasis). A return source signal is also 
selected which returns the signal to the channel strip from an ASIO Host Output.

The ASIO Direct Monitor Send/Return is unique in that it utilizes ASIO 2.0 zero-latency 
monitoring. In order to utilize this feature, Direct Monitoring must be enabled in the 
audio recording application. 

While recording, the Direct Monitor Send/Return routes the signal to the recording 
application, but monitors directly from the input to eliminate latency. During playback, 
the recording application automatically switches the Direct Monitor Send/Return to 
monitor the recorded track.

The Direct Monitor Send/Return also allows the recording application to control 
volume and pan. Normally when using direct monitor recording you’ll want to control 
the volume and pan from the recording application. In this case, set the PatchMix DSP 
stereo pan controls hard left and right, mono pan controls to center, and the fader to 
0dB.

To Physical Output
From Physical Input

If the source or 

destination you want to 
use is not available in the 
list, they are probably 
already being used 
elsewhere. Check the 
input Strips, Inserts and 
Output Assignments.