Creative 0404 ユーザーズマニュアル

ページ / 96
5 - Effects
Core Effects Descriptions
46
Creative Professional
3-Band EQ
This versatile equalizer provides two shelving filters at the high and low ends of the 
frequency range and a fully parametric band in the center. Up to ±24 dB of boost or cut 
is provided for each band.
E
Note: The Wet/Dry 
Mix control on an 
equalizer should normally 
be set to 100% wet or 
unpredictable results may 
occur.
Setting up a Parametric EQ
1.
Turn up the gain on the band you are working with. This allows you to easily hear 
the effect of the filter.
2.
Reduce the bandwidth if you are working with a mid-band.
3.
Now adjust the Center Frequency to “zero-in” on the frequencies you wish to boost 
or cut.
4.
Set the Gain to a positive value to boost frequencies or to a negative value to cut out 
frequencies.
5.
Widen the Bandwidth to create a more natural sound.
6.
Adjust and tweak as needed.
Parameter
Description
High Shelf Gain
Sets the amount of cut (-) or boost (+) of the high frequency shelf.
Range: -24dB to +24dB
High Corner Freq. Sets the frequency where the signal begins getting cut or boosted 
with the High Gain control. Range: 4kHz to 16kHz
Mid Gain
Sets the amount of cut (-) or boost (+) of the mid frequency band.
Range: -24dB to +24dB
Mid Center Freq.
Sets the range of frequencies to be cut or boosted with the Mid 
Gain control. Range: 200Hz to 3kHz
Mid Bandwidth
Sets the width of the frequency range for the Mid Center 
Frequency band that will be cut or boosted by the Mid Gain 
control. Range: 1 semitone to 1 octave
Low Shelf Gain
Sets the amount of cut (-) or boost (+) of the low frequency shelf.
Range: -24dB to +24dB
Low Corner Freq.
Sets the frequency where the signal begins getting cut or boosted 
with the Low Gain control. Range: 50Hz to 800Hz
Frequency
Low Shelf
Mid Band
High Shelf
Boost
Gain
Cut
Corner
Freq.
Corner
Freq.
-
+
Center
Width
+24dB
-24dB