Sony LBT-ZX99I マニュアル

Press AMP MENU repeatedly to 
select “SPECTRUM”.
The last selected spectrum appears in 
the display.

B

 or 

b

 repeatedly to 

select the setting you want.
The display changes cyclically as 
follows:
SPECTRUM 1 t SPECTRUM 2 t 

SPECTRUM 3 t SPECTRUM 4 t 

SPECTRUM OFF

The display changes as follows:

X-POSITION* y SPECTRUM OFF

* The spectrum analyzer display will 

synchronize with the selected X-ROUND 
effect.

Press AMP MENU repeatedly to 
select “DIMMER”.
The last selected dimmer appears in 
the display.

B

 or 

b

 repeatedly to 

select the setting you want.
The display changes cyclically as 
follows:
DIMMER 1 t DIMMER 2 t 

DIMMER 3*

* DIMMER 3 is the darkest.

Press DISPLAY repeatedly while 
the system is turned off.
You can select the following display 
mode.

1)

The display changes and the indicators 
flash even when the system is turned off.

1)2)

The display is turned off to conserve 
power. The timer and clock continue to 
operate.

The clock is displayed. The clock display 
automatically turns to Power Save Mode 
after a few seconds. However, the display 
returns to clock display when you connect 
an iPod.

3)

1)

When an iPod is connected, the display 
change to clock. If you remove the iPod, the 
display changes to Power Saving Mode after a 
few seconds.

2)

You cannot perform the following operations 
during Power Saving Mode:
– Setting the clock (page 16).
– Changing the AM tuning interval (page 20).
– Turning on the system by pressing the 

function buttons or BX.

– Changing “CD POWER” setting (page 19).

3)

The clock is displayed continuously while the 
iPod is being charged. To turn off the clock 
display, press DISPLAY (see “To stop 
charging the iPod” (page 21)).