IBM 2-port 10Gb Ethernet CFFh 42C1810 ユーザーズマニュアル
製品コード
42C1810
Intel 2-port 10 Gb Ethernet Expansion Card (CFFh) for IBM BladeCenter
5
In BladeCenter H, the ports of CFFh cards are routed through the midplane to I/O bays 7, 8, 9, and 10, as
shown in Figure 3. The BladeCenter HT works in a similar way because the CFFh cards are also routed
through the midplane to I/O bays 7, 8, 9, and 10.
shown in Figure 3. The BladeCenter HT works in a similar way because the CFFh cards are also routed
through the midplane to I/O bays 7, 8, 9, and 10.
Figure 3. IBM BladeCenter H I/O topology showing the I/O paths from CFFh expansion cards
The Intel 2-port 10 Gb Ethernet Expansion Card (CFFh) requires that two I/O modules be installed in bays
7 and 9 of the BladeCenter H or HT chassis, as shown in Table 4.
7 and 9 of the BladeCenter H or HT chassis, as shown in Table 4.
Table 4. Locations of I/O modules required to connect to the expansion card
Expansion card
I/O bay 7
I/O bay 8
I/O bay 9
I/O bay 10
Intel 2-port 10 Gb Ethernet Expansion
Card (CFFh)
Card (CFFh)
Supported I/O
module
module
Not used
Supported I/O
module
module
Not used