Rocketfish RF-QX4-J ユーザーズマニュアル
7
RF-QX4/RF-QX4-T/RF-QX4-E/RF-QX4-J
Charging the battery
Before using the headset, you must charge the battery for
approximately two hours. When the battery is fully charged, it
provides up to 7 hours of talk time or up to 250 hours of standby
time.
approximately two hours. When the battery is fully charged, it
provides up to 7 hours of talk time or up to 250 hours of standby
time.
To charge the battery:
• Connect the AC wall charger to the headset and to a power outlet.
While the battery is charging, the indicator lights red. When the
battery is fully charged, the indicator lights green.
battery is fully charged, the indicator lights green.
Turning the headset on or off
To turn the headset on or off:
1
To turn on the headset, press and hold the Power/Send/End button
for about two seconds. The headset beeps and the indicator blinks
green. (The first time you turn on the headset, you have to press
and hold the power button for five seconds.)
2
To turn off the headset, press and hold the power button for
about four seconds. The headset beeps and the indicator briefly
lights red.
Pairing the headset with a compatible phone
Pairing is the process of linking the headset with a Bluetooth-enabled
mobile phone. After you pair the headset with a phone, you can only
use the headset with the paired phone. If you want to use the
headset with a different phone, you must repeat the pairing process
with the new phone. The headset can be paired with up to eight
compatible phones, but it can be connected to only one phone at a
time.
mobile phone. After you pair the headset with a phone, you can only
use the headset with the paired phone. If you want to use the
headset with a different phone, you must repeat the pairing process
with the new phone. The headset can be paired with up to eight
compatible phones, but it can be connected to only one phone at a
time.
To pair the headset with a compatible phone:
1
Make sure that a compatible phone is turned on and within 33
feet (10 meters) of the headset.
2
Turn on the headset and make sure that the battery is fully
charged.
3
Press and hold the Power/Send/End button for about four seconds.
The indicator rapidly flashes green.
4
Release the button. The headset is now in pairing mode.