Rocketfish RF-QX3 ユーザーズマニュアル

RF-QX3 Wireless Bluetooth Headset

Select RF-QX3 from the list of found devices displayed on the phone.

If neccessary, enter a PIN code 0000 to pair and connect the headset with

your phone. With some phones, you need to make a connection

separately after pairing.

Disconnecting the headset from the phone

To disconnect the headset from the phone:

• Turn off the headset.

Or,

• Disconnect the headset in the phone’s menu.

Or,

• Move the headset more than 33 feet (10 meters) away from the phone.

Note:

You do not need to delete the pairing with the headset to disconnect the

headset. When you reconnect the headset to a phone it has be paired with, you do
not have to enter the code 0000 again.

Reconnecting the headset to the phone

Note:

The headset connects to the last connected phone by default. If the last phone is

out of the Bluetooth operating range or you are not using the last phone, the headset
searches and connects to the other paired phones.

To reconnect the headset to the last phone used:

• If the headset is turned off, turn it on. It automatically connects to the

phone.

Note:

If the headset is out of Bluetooth operating range (33 feet/10 meters) for less

than two minutes, the headset sounds a warning tone and the indicator flashes
yellow-green every 2.5 seconds. If you move the headset back into operating range, it
automatically reconnects with the phone.

If the headset is out of Bluetooth operating range for more than two minutes, go
back into range then press and hold the power/send/end button until a beep sounds
to indicate the connection is reactivated.

Making a call

To make a call:

• Use the phone in the normal way. See the phone’s documentation for

instructions.