Sony VBD-MA1 マニュアル

ページ / 84
66
Cannot record to this disc by the 
selected operation.
• Usable discs differ depending on type of 
content and recording method (pages 23
67).
For example:
– SD (Standard Definition) video stored on 
a camera connected with a USB cable 
cannot be recorded to DVD+R DL disc.
– SD (Standard Definition) video cannot be 
recorded to BD-R or BD-RE.
– SD (Standard Definition) video cannot be 
recorded additionally on the disc that HD 
(Hard Definition) video is already 
recorded.
Too many photos.
Will import maximum number of 
allowable photos only.
• Depending on the type or volume of photo 
data, the number of photos recordable at 
one time differs (up to a maximum of 9999 
photos).
No recordable content found.
• The camera or memory card does not 
contain any videos or photos which support 
the recording function of this unit.
• The camera or memory card contains only 
HD (High Definition) video, however SD 
(Standard Definition) video may be 
selected for recording (or vice versa). To 
select the correct type, operate from the 
[Menu] screen.
The disc is full.
• Even if the disc is not full, you cannot 
record to the disc when the number of video 
titles or photos reaches a maximum number 
for recording.
• In some cases, full-capacity recording may 
not be possible, depending on how the disc 
is used.
Some videos unsupported to record 
found.
Copy videos other than those?
• HD (High Definition) video taken in 
recording mode at a bit rate exceeding 
18Mbps, such as in [HD FX] mode, is 
contained in a camera or memory card. You 
cannot copy this video to DVD. Select 
[Yes] to record videos other than the above 
video, or use a Blu-ray Disc.
• HD (High Definition) video taken in unique 
format, such as in 1080/60p recording 
mode, 3D video format, etc., is contained in 
a camera or memory card. You cannot copy 
this video. Select [Yes] to record videos 
other than the above video.
Input device error.
• Check that the camera is correctly 
connected to this unit with USB cable. 
Check that the camera is turned on.
• Remove the memory card and insert again.
System error.
• When this message appears repeatedly, this 
unit may be damaged.