Cardo G4 ユーザーズマニュアル

2. Search for a new station as described in the section above.
3. Tap the CHANNEL “B” button within 20 seconds of finding the sta-

tion to save the current station. 

4. If you don’t save the station, the Radio will exit search mode with-

out saving the current station. You can still continue to listen to the 

current unsaved station. Tapping the CHANNEL “B” Button in this 

case will move to the next saved station.

You can store up to six stations.

Your scala rider G4 headset has an auxiliary jack which allows you to 

connect non-Bluetooth audio sources, such as MP3 players (with 3.5 

mm - 1/8” stereo jacks) to the headset by using the enclosed cable. 

1. Make sure the headset is on Standby mode, flashing slowly in Blue.

2. Connect the MP3 cable to your MP3 

player/audio source’s 

headset jack and insert the 

other end of the cable into 

the Auxiliary jack.

3. Operate the MP3 Player 

device by using its own 

buttons as usual (FF/REW/ 

PLAY/PAUSE).
Volume can be adjusted through the MP3 Player or the Volume 

Buttons of the headset.

Any other audio connection will automatically mute the MP3 Player. The 

audio signal will return only when headset is once again in Standby mode.

During an incoming call, tap the Mobile But-

ton or speak loudly any word of your choice

Remain silent for 15 seconds, OR press and 

hold the Mobile Button for 3 seconds during 

an incoming call

Tap the Mobile Button during a call, or let the 

other party terminate the call

During Standby, tap the Mobile Button and pro-

nounce loudly the name of the person you wish 

to call. This feature is supported only by mobile 

phones that include the Voice Dial feature

During Standby, tap the Mobile Button twice

Tap the CHANNEL “A” button while on a phone 

call

Tap the CHANNEL “B” button while on a phone 

call

When the headset is on an active phone call, any Intercom call 

request will be automatically rejected.
Once the phone call is terminated, you can initiate and accept Inter-

com calls.