Clarion MAX685BT ユーザーズマニュアル

MAX685BT

• For your safety, the driver should not 

• Do not start the vehicle’s engine while the 

1. Turn on the power of your USB media device, 

if required.

2. Confirming the orientation of the connectors, 

connect the USB media device to the USB 
connector of this unit.
• It may take a long time to recognize the 

connected device.

The system will automatically be switched to the 
relevant source media mode according to the 
USB device connected, and start playback.

When an iPod is connected:
The system is switched to the iPod mode. See 
“iPod Operations” (page 44).

When an MTP audio player is connected:
The system is switched to the MTP Audio Player 
mode. See “MTP Audio Player Operations” 
(page 48).

When an USB memory is connected:
The system is switched to the USB Memory 
mode. See “USB Memory Operations” (page 49).

Note:
• Never insert foreign objects into the USB 

• Always insert the USB media device fully into the 

1. Confirm that data transfer is not performed on 

the USB media device.
For the method to confirm it, see the operation 
manual of your USB media device.

2. Remove the USB media device from the USB 

connector.

Note:
• When turning on the ACC power with no USB