Clarion BD269RGMP ユーザーズマニュアル

280-8302-00

DB268RMP/BD269RMP/BD269RGMP

This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular

telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.

∗ The factory default setting is “TEL OFF”.
1. Press the [D] button and press [

å]/[∂]

button to select “TEL-SW”.

2. “TEL ON” or “TEL OFF” will be display after

2 seconds.

3. Turn the [ROTARY] knob clockwise to turn

on the telephone interrupt or
counterclockwise to turn off the telephone
interrupt.
∗ During telephone interrupt, the display shows

“TEL”.

1. Press the [SRC] button and select the radio

mode. The frequency or PS appears in the
display.
∗ PS: Programme service name

2. To select a preset band, press the [BND]

button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the [BND] button is pressed, the display will
change as:

F1 

➜ F2 ➜ F3 ➜ AM ➜ F1...

3. Press the [

å] or [∂] button to tune in the

desired station.

There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.

There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.

DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

●DX SEEK
Press the [

å] or [∂] button to automatically

seek a station.

When the [

∂] button is pressed, the station is

sought in the direction of higher frequencies; if
the [

å] button is pressed, the station is sought

in the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the

display.

●LOCAL SEEK
If you press and hold the [

å] or [∂] button

for 1 second or longer, local seek tuning is
carried out.

Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, “LO” appears in the

display.