Clarion CZ101ER ユーザーズマニュアル

English

15

Unit can not 

power on.

Unit fuse blown.

Replace with new fuse of correct rating.

Car battery fuse blown.

Replace with new fuse of correct rating.

Unit can not 

power on.
Nothing happens 

when buttons are 

pressed.
Display is not 

accurate.

The microprocessor has 

malfunctioned due to noise, etc.

Turn off the power and remove the DCP.

Press the [RESET] button with a thin rod.

When the [RESET] button is pressed, turn 

off the ACC power.*

* When the [RESET] button is pressed, 

frequencies of radio stations, titles, etc. 

stored in memory are cleared.

No/low audio 

output.

Improper audio output 

connection.

Check wiring and correct.

Volume set too low.

Increase volume level.

Speakers damaged.

Replace speakers.

Heavily biased volume balance. Adjust the channel balance to center 

position.

Speaker wiring is in contact with 

metal part of car.

Insulate all speaker wiring connections.

Poor sound 

quality or 

distortion.

Non-standard disc used.

Use a standard disc.

Speaker power rating does not 

match unit.

Replace speakers.

Wrong connections.

Check wiring and correct.

Speaker is shorted.

Check wiring and correct.

Tel-Mute 

malfunction.

MUTE wire is grounded.

Check the MUTE wiring and correct.

Unit resets itself 

when engine 

is off.

Incorrect connection between 

ACC and Battery.

Check wiring and correct.