JVC KD-G700 ユーザーズマニュアル
25
ENGLISH
Storing your own sound
adjustments
adjustments
You can adjust the sound modes to your
preference and store your own adjustments in
memory (USER 1, USER 2 and USER 3).
preference and store your own adjustments in
memory (USER 1, USER 2 and USER 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
finish, start from step
1 again.
1
Press MODE to enter the functions
mode.
mode.
2
Press EQ (equalizer) while “MODE”
is still on the display.
is still on the display.
The last selected sound mode
is called up.
is called up.
3
Select the sound mode you want to
adjust.
adjust.
4
Select sound elements to adjust.
Each time you press the
button, the sound elements
change as follows:
button, the sound elements
change as follows:
LOW LEVEL*
= LOW FREQ = LOW WIDTH
= MID LEVEL* = MID WIDTH
= HI (high) LEVEL* = HI (high) FREQ
= (back to the beginning)
FREQ (LOW, HI):
Select the center frequency to adjust.
WIDTH (LOW, MID):
Select the band width level.
LEVEL (LOW, MID, HI):
Adjust the enhancement level.
* By pressing
¢ or 4
, you can
directly move as follows:
5
Adjust the selected sound element.
6
Repeat steps
4
and
5
to adjust the
other sound elements.
7
Select one of the user sound modes
(USER 1, USER 2, USER 3).
(USER 1, USER 2, USER 3).
8
Press EQ to store the adjustments.
“MEMORY” appears for a
while.
while.
LOW LEVEL
MID LEVEL
HI LEVEL
Indication
Preset values
LOW
MID
HI
LEVEL
–06 (min.) –06 (min.) –06 (min.)
|
|
|
+06 (max.) +06 (max.) +06 (max.)
FREQ.
60Hz
8kHz
80Hz
10kHz
100Hz
12kHz
120Hz
15kHz
WIDTH
1 (min.)
1 (min.)
|
|
4 (max.)
2 (max.)
Ex.: When you select “JAZZ”