Jensen CD1211 ユーザーズマニュアル
CD1211
7
OPERATING INSTRUCTIONS
Power
Press the power button (1) or any other button
on the face of the receiver to turn the unit on
when the ignition switch is on. Press the power
button again to turn the receiver off. If the radio
was left on when the ignition was last turned off,
the receiver will turn on automatically when the
ignition switch is again turned on. If the receiver
was off when the ignition was last turned off, the
receiver must be turned on manually when
restarting the vehicle.
on the face of the receiver to turn the unit on
when the ignition switch is on. Press the power
button again to turn the receiver off. If the radio
was left on when the ignition was last turned off,
the receiver will turn on automatically when the
ignition switch is again turned on. If the receiver
was off when the ignition was last turned off, the
receiver must be turned on manually when
restarting the vehicle.
Mode
Press MODE (2) to select a different mode of
operation as indicated on the display panel.
Available modes include Tuner, CD, and
Auxiliary Input. During CD player operation,
pressing MODE will change to the tuner mode
without ejecting the disc. To access the
Auxiliary Input mode, press the MODE button
until "AUX" is indicated in the display.
operation as indicated on the display panel.
Available modes include Tuner, CD, and
Auxiliary Input. During CD player operation,
pressing MODE will change to the tuner mode
without ejecting the disc. To access the
Auxiliary Input mode, press the MODE button
until "AUX" is indicated in the display.
Volume
To increase the volume, turn the AUDIO
CONTROL (3) clockwise. To decrease the
volume, rotate the AUDIO CONTROL counter
clockwise. When volume is adjusted, the
volume level is shown on the display panel as a
number ranging from “00” (lowest) to “100”
(highest).
CONTROL (3) clockwise. To decrease the
volume, rotate the AUDIO CONTROL counter
clockwise. When volume is adjusted, the
volume level is shown on the display panel as a
number ranging from “00” (lowest) to “100”
(highest).
Select
Press the AUDIO CONTROL button (4) to step
through the menu of audio functions: volume
(VOL), bass (BAS), treble (TRB), balance
(BAL), fader (FAD), and volume (VOL). When
adjusting audio functions, the unit will
automatically exit select mode and return to the
normal display after five seconds or when
another function is activated.
Bass
Press the AUDIO CONTROL button (4) twice
until “BAS” appears in the display. Within five
seconds, turn the AUDIO CONTROL (3)
through the menu of audio functions: volume
(VOL), bass (BAS), treble (TRB), balance
(BAL), fader (FAD), and volume (VOL). When
adjusting audio functions, the unit will
automatically exit select mode and return to the
normal display after five seconds or when
another function is activated.
Bass
Press the AUDIO CONTROL button (4) twice
until “BAS” appears in the display. Within five
seconds, turn the AUDIO CONTROL (3)
clockwise or counter clockwise to adjust the
bass from “-10” to “+10”. “00” represents a flat
response. The bass level is shown on the
display for five seconds or until another function
is activated.
Treble
Press the AUDIO CONTROL button (4) three
times until “TRB” appears in the display. Within
five seconds, turn the AUDIO CONTROL (3)
clockwise or counter clockwise to adjust Treble
from “-10” to “+10”. “00” represents a flat
response. The treble level is shown on the
display for five seconds or until another function
is activated.
bass from “-10” to “+10”. “00” represents a flat
response. The bass level is shown on the
display for five seconds or until another function
is activated.
Treble
Press the AUDIO CONTROL button (4) three
times until “TRB” appears in the display. Within
five seconds, turn the AUDIO CONTROL (3)
clockwise or counter clockwise to adjust Treble
from “-10” to “+10”. “00” represents a flat
response. The treble level is shown on the
display for five seconds or until another function
is activated.
/
TUNE
CD1211 CD RECEIVER
SCAN
MONO
EQ
AUX IN
1
9
10
8
5
19
6
4
3
2
14
20
13