Jensen BT1613 ユーザーズマニュアル

BT1613

18

Before attempting to use the Bluetooth 
functions on the BT1613, please make sure 
your mobile phone supports Bluetooth functions 
(Headset or Handsfree profiles or both). Adhere 
to the following guidelines for successful 
operation.

•

Before using Bluetooth functions, you 
must pair your mobile phone to the 
BT1613 head unit. (See “Pairing the 
Bluetooth system with your Mobile Phone 
and Head Unit” on page 18.) To ensure the 
best reception for pairing and re-
connection, please make sure the phone 
battery is fully charged before you begin.

•

Try to perform pairing within a few minutes 
of the phone being turned on.

•

Once the unit has been paired with the 
phone, “BT60A” will be displayed on the 
mobile phone.

•

To achieve the best performance, always 
keep the mobile phone within 3 meters of 
the head unit.

•

Always keep a clear path between the 
mobile phone and the head unit. Never 
place a metal object or any other obstacle 
between the mobile phone and the head 
unit.

•

Some mobile phones (like Sony Ericsson) 
may have a "Power Saving Mode" option. 

PLEASE DO NOT use the Power saving 
Mode with the BT1613.

•

Before accepting or making a call, make 
sure your mobile phone's “Bluetooth 
function” is turned on.

•

To ensure the best conversation quality/
performance, stay within one meter of the 
head unit when talking. 

•

To “disconnect” the mobile phone from the 
head unit, turn the Bluetooth connectivity 
off on the mobile phone or use the DIS-
CON (disconnect) feature under the 
System Menu (see “RE-CON/DIS-CON” 
on page 3).

•

While talking in Telephone mode, it is 
recommended that you set the main 
volume level below “30”. A higher volume 
setting may create an unwanted echo in 
the vehicle that can feed back into the 
microphone.

•

If you have difficulty pairing or the 
Bluetooth operation is not functioning 
properly, you can try a “soft reset” by 
removing the front panel (see “Front Panel 
Release” on page 4) and waiting 1 minute. 
If after reattaching the panel, operation 
has not resumed normally, you can 
perform a complete system Reset (see 
“Reset Button” on page 5).

1.

Press and hold the DISP button (9) to 
access the MENU. “PAIR HF” is the first 
option on the menu.

2.

Press the AUDIO CONTROL button (4) to 
initiate the pairing process. Keep the 
mobile phone within 2 meters of the unit 
during pairing.

3.

Refer to the instructions that came with 
your mobile phone to activate the 
Bluetooth function and search for devices.

4.

Select “BT60A” from the pairing list on the 
mobile phone. 

5.

Enter “1234” as the password. 
•

If pairing is successful, the display 
will show your device name. 

•

If pairing fails, “PAIR FAIL” is flashed 
on the display for 3 seconds, and 
then the unit will revert to the 
previous operation automatically. If 
pairing fails, repeat the above steps.