Kenwood KDC-515S ユーザーズマニュアル
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
Function of the KDC-X615
Storing your sound settings:
Press a preset button (#1-6) for at least two seconds except
during the bass center frequency, bass level, bass quality
factor, bass extension, treble center frequency, and treble level
adjust mode.
during the bass center frequency, bass level, bass quality
factor, bass extension, treble center frequency, and treble level
adjust mode.
• This setting can be made only when the Sound coordinate
system is on. (page30)
• The settings you can preset are, bass center frequency, bass
level, bass quality factor, bass extension, treble center
frequency, and treble level.
frequency, and treble level.
NOTE
"V OFFSET/VOS" : Set the sound level of the each source
selected by adjusting the level difference
between the basic sound level and the
required level.
between the basic sound level and the
required level.
Setting values: - 8 – ± 0
Function of the KDC-X615
"NF Phase" : Adjust the phase for Non-Fading output.
Setting values: Normal (0°) / Reverse (180°)
This mode is available only when the non-fading output function
is set to on.
is set to on.
NOTE
Function of the KDC-X615
"LPF NF" : Adjust the frequency of the Low-pass filter for Non-
Fading output.
Setting values: 50 Hz / 80 Hz / 120 Hz / Through
This mode is available only when the non-fading output function
is set to on.
is set to on.
NOTE
Function of the KDC-X615
"HPF R" : Adjust the frequency of the High-pass filter for rear
output.
Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
You can separately set the high-pass filter for front and rear
output,including preouts. The high-pass filter works except during
non-fading preout when switching to non-fading. The factory
default settings for front output and rear output are "through" .
output,including preouts. The high-pass filter works except during
non-fading preout when switching to non-fading. The factory
default settings for front output and rear output are "through" .
NOTE
Function of the KDC-X615
"HPF F" : Adjust the frequency of the High-pass filter for front
output.
Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
You can separately set the high-pass filter for front and rear
output,including preouts.The high-pass filter works except during
non-fading preout when switching to non-fading.The factory
default settings for front output and rear output are "through" .
output,including preouts.The high-pass filter works except during
non-fading preout when switching to non-fading.The factory
default settings for front output and rear output are "through" .
NOTE
General features
— 10 —
English
KDC-X615_U.S_K_r6 00.12.26 3:45 PM Page 10