Sony CDX-S2010X ユーザーズマニュアル
12
Error displays/Messages
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
During FM reception, the “ST” indication
flashes.
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
t Press (SENS) to set the monaural reception
mode to “MONO-ON.”
An FM programme broadcast in stereo is
heard in monaural.
heard in monaural.
The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.
t Press (SENS) until “MONO-OFF” appears.
ERROR
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• The disc cannot play because of some problem.
t Insert another disc.
FAILURE
The speaker/amplifier connection is incorrect.
t See the supplied installation/connections
t See the supplied installation/connections
manual to check the connection.
L.SEEK +/–
The local seek mode is on during automatic
tuning.
tuning.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
t Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
nearest Sony dealer.
RESET
“
” or “
”
During fast-forward or reverse, you have reached
the beginning or the end of the disc and you
cannot go any further.
the beginning or the end of the disc and you
cannot go any further.