Audiovox UMP8015 ユーザーズマニュアル

UMP8015

14

To access the cassette door, located behind the 
front panel, press the OPEN button (21). The 
front panel will open and fold down to the 
horizontal position, allowing room to insert a 
cassette into the player. To insert a cassette, 
hold the cassette with the exposed tape edge of 
the side to be played to the right and insert it 
fully into the cassette door. As the cassette is 
engaged and begins playing, “TAPE” appears 
on the display panel accompanied by the tape 
symbol (

). Direction of play is indicated by 

an animated curser which moves in a square 
pattern. Clockwise rotation indicates left-to-right 
tape motion, while counter-clockwise rotation 
indicates right-to-left tape motion. When the 
cassette reaches the end of one side, the unit 
automatically changes direction of play as 
shown by the arrow indications on the display 
panel.

The fast forward and rewind buttons cause the 
tape to move rapidly in the direction indicated 
by the arrows. If the fast-forward (

) button is 

pushed when the tape is moving from left to 
right, the tape quickly advances forward. If the 
rewind (

) button is pressed while the tape is 

moving from right to left, the tape rewinds. To 
stop fast tape movement, lightly push the 
opposite button. If the tape is allowed to fast-
forward or rewind all the way to the end, play 
automatically starts from the beginning.

To manually reverse tape direction and play the 
other side of the cassette, lightly push both the 
fast-forward and rewind buttons (25) at the 
same time. The change of direction is indicated 
by the animated cursor on the display panel.

To stop tape playback and eject the tape, press 
the tape eject   button (26), located behind the 
front panel. If the button is not visible, press the 
OPEN button (21) to release the front panel and 
lower it to the horizontal position. Radio 
operation resumes when the cassette is 
ejected.

RESET