Alpine INA-W910 ユーザーズマニュアル

ページ / 131
102
-EN
 
Setting the iPod Control
When an iPod/iPhone is connected, you can choose to operate it from 
this unit or from its own controls.
Touch and hold 
 or 
 for at least 2 seconds on 
the iPod main screen to switch iPod control mode 
between this unit and iPod/iPhone.
Once the control mode is changed, this will set pause status, 
touch [
/
] to continue.
• When using the iPod control mode, make sure the USB 30P cable is 
connected to the iPod(V)/AUX Input Connector correctly by using the 
AV extension cable.
• In the iPod control mode, if nothing is played back by the iPod, 
“Stop” will be displayed on this unit.
• Depending upon the iPod used, iPod control may not be selectable. 
Or, if iPod is selected, operation must still be from the head unit.
Playback
1
Press SOURCE/
 on the unit.
The SOURCE selection screen is displayed.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast backward the current song:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward the current song:
Touch and hold [
].
4
To pause playback, touch [
/
].
Touching [
/
] again will resume playback.
• If a song is playing on the iPod/iPhone when it is connected to the 
 
INA-W910, it will continue playing after the connection.
• An episode may have several chapters. The chapter can be changed 
by pressing [
] or [
].
• Display mode can be changed by touching [WIDE] when an iPhone 
or iPod compatible video is connected. For details, refer to 
“Switching Display Modes” (page 55)
.
• If the artist, album or song name, created in iTunes, has too many 
characters, songs may not be played back when connected to the 
INA-W910. Therefore, a maximum of 250 characters is 
recommended. The maximum number of characters for the head unit 
is 128 (128 byte).
• Some characters may not be correctly displayed.
• “No Support” is displayed when text information is not compatible 
with the INA-W910.
• If the audio source is switched to Pandora during playback of video 
file in iPod/iPhone, playback will start from the beginning when the 
source is switched to iPod video again.
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. By keeping these songs 
organized in playlists, the INA-W910 can use these to ease song 
searches.
Using the search mode’s individual hierarchy, you can narrow down 
your search as shown in the table below.
<MUSIC Search Menu>
• Video search mode depends on the iPod/iPhone. If the specification 
of the iPod/iPhone is changed, the search mode on this unit will also 
be changed.
For example: Searching by Artist name
The following example explains how an ARTISTS search is performed. 
Another search mode can be used for the same operation, although the 
hierarchy differs.
: Switch the iPod control to iPod/iPhone.
 
Operate the iPod/iPhone using its own controls. 
When iPod is selected, some functions will not be 
operable via the head unit.
: Switch the iPod control to this unit.
 
Operate the iPod/iPhone via this unit.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlists
Songs
Artists*
Albums*
Songs
Albums*
Songs
Songs
Podcasts
Episodes
Genres*
Artists*
Albums*
Songs
Composers*
Albums*
Songs
Audiobooks