Meyer Sound UP-4XP ユーザーズマニュアル

16

■

When connecting UP-4XP loudspeakers equipped with 
EN3 connectors to the MPS-488HPe power supply, use 
EN3 5-pin male to EN3 5-pin female cables.

■

To join two EN3 cables, one with an EN3 5-pin male 
cable mount connector to one with an EN3 5-pin female 
cable mount connector, use an EN3 5-pin female-to-
male cable coupler (PN 28.163.033.01).

Make sure UP-4XP loudspeaker 

cables are wired correctly. For details on 

assembling loudspeaker cables, see Appendix B, 
“Phoenix and EN3 Cable Assembly.”

5. Power on the MPS-488HP and monitor the LEDs on the 

front panel to verify connections. For information on the 
MPS-488HP LEDs, refer to the MPS-488HP Operating 
Instructions.

6. Check the LEDs on the UP-4XP rear panels and verify 

they are green (ready to reproduce audio).

7. Enable output from the audio sources (from the mixer or 

processor) connected to the MPS-488HP.