Meyer Sound UP-4XP ユーザーズマニュアル

30

2. Insert the five exposed conductors, from one end of the cable, into the five cable holes in one of the Phoenix connectors. 

Use the following wiring scheme.

3. Secure the conductors by tightening the five screws in the Phoenix connector.

4. Repeat the previous steps and attach the other end of the cable to the other Phoenix connector.

5. Verify the wiring polarity is correct for both connectors.

Pin #1

Black

48 V DC (–)

Pin #2

Red

48 V DC (+)

Pin #3

Shield drain

Audio shield

Pin #4

Blue

Audio (–)

Pin #5

White

Audio (+)

Connector side up

Side (cable attached)

Tighten screws