ONKYO SKS-4800 ユーザーズマニュアル

2

Center speaker system SKC-4800 × 1

Surround speaker system SKR-4800 × 2
The two speakers are identical, so it doesn’t matter 
which one you use on the left or right.

• Turn the sound volume to the minimum and 

disconnect the power cord from the amplifier before 
connecting the speaker cables.

• The nominal impedance of this speaker system is 6 Ω. 

Use only amplifiers capable of handling this 
impedance.

• Use the supplied speaker cables to connect between 

speaker’s input terminals and the amplifier’s speaker 
terminals as illustrated on the below.

• Use the red line wires to connect the positive (+) 

terminals.

• Connect the speaker cables 

securely to the terminals, with the 
core wires twisted properly. In this 
case, make sure that the core wires 
do not touch each other. Note that 
a short circuit in core wires may 
result in damage to the amplifier.

+

–

+

–

 

+

–

+

–

+

–

1. Strip the insulation of speaker cables, 

and twist the core wires tightly.

2. While pressing the lever, insert the 

wire into the hole, and then release 
the lever.

3. Make sure that the terminals are 

gripping the core wires, not the 
insulation.

SKF-4800
Front right speaker

SKF-4800
Front left speaker

SKC-4800
Center speaker

AV amplifier

SKR-4800
Surround 
right 
speaker

SKR-4800
Surround left 
speaker

Red line

Red line