Juniper DPCE-R-40GE-TX ユーザーズマニュアル

ページ / 198
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Fine-grained egress queuing per logical interface. See the Junos Class of Service Configuration
for more information about class-of-service features
Packet buffering
Local line and remote payload loopback testing
Optical diagnostics and monitoring
Clocking options: internal or external/loop mode. Each OC48 transmitter port is configured
either in internal or external mode. The default clocking option is internal mode.
Encapsulations:
Extended Frame Relay for circuit cross-connect (CCC) and translational cross-connect
(TCC)
Flexible Frame Relay
Frame Relay
Frame Relay for CCC
Frame Relay for TCC
Frame Relay port CCC
High-Level Data Link Control (HDLC)
HDLC framing for CCC
HDLC framing for TCC
MPLS CCC
MPLS TCC
Point-to-Point Protocol (PPP)
PPP for CCC
PPP for TCC
Software features
You can install any transceiver supported by the PIC.
Duplex LC/PC connector (Rx and Tx)
SONET/SDH OC48/STM16 small form-factor pluggable (SFP) transceivers:
Short reach (SR-1) (model number: SFP-1OC48-SR)
Intermediate reach (IR-1) (model number: SFP-1OC48-IR)
Long reach (LR-1) (model number: SFP-1OC48-LR)
Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications
NOTE:
To extend the life of the laser, when a PIC is not being actively used with any valid links,
take the PIC offline until you are ready to establish a link to another device. For information about
taking a PIC offline, see the
request chassis pic offline
command in the Junos OS Operational Mode
Commands.
Cables and connectors
177
Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP