JL Audio SB-P-CYNNE/10W6v2/BK ユーザーズマニュアル
Continued on Next Page
SB-P-CYNNE/10W6v2/BK_INSTR_SKU#011231
SB-P-CYNNE/10W6v2/BK_INSTR_SKU#011231
S T E P 1 5
Remove the plastic ring from the rear seat’s upper latch pin.
Remove the plastic ring from the rear seat’s upper latch pin.
S T E P 1 4
With a 17mm socket and ratchet, remove the seat belt
retracting unit.
With a 17mm socket and ratchet, remove the seat belt
retracting unit.
S T E P 1 3
Remove the trim panel.
Remove the trim panel.
S T E P 1 2
Remove the plastic collar that is around the hinge pin.
Remove the plastic collar that is around the hinge pin.
Page 3 • JL Audio, Inc 2007
S T E P 1 7
An airbag is located behind the c-pillar trim. Use caution
while removing this panel. All wiring/connections should be
protected.
An airbag is located behind the c-pillar trim. Use caution
while removing this panel. All wiring/connections should be
protected.
As in the illustration, reach around to the rear of the c-pillar
trim and carefully remove the c-pillar trim from the c-pillar,
by pulling towards you.
trim and carefully remove the c-pillar trim from the c-pillar,
by pulling towards you.
S T E P 1 9
From the driver’s side rear door opening. Pull the front of the
cargo side trim panel from the vehicle’s body. Do not fully
remove this side trim panel at this time.
From the driver’s side rear door opening. Pull the front of the
cargo side trim panel from the vehicle’s body. Do not fully
remove this side trim panel at this time.
S T E P 1 8
With a T-25 socket remove the bolt that secures the front
of the side trim panel to the c-pillar.
With a T-25 socket remove the bolt that secures the front
of the side trim panel to the c-pillar.
S T E P 1 6
Pull the SRS plastic badge from the upper c-pillar trim.
Pull the SRS plastic badge from the upper c-pillar trim.
With a T-25 socket, remove the bolt that has been
exposed.
exposed.