JL Audio SB-GM-SLVCRW/10W1v2 ユーザーズマニュアル

INSTALLATION

D I F F I C U LT Y :

I N S T A L L A T I O N G U I D e

for the

SB-GM-SLVCRW/10W1v2

1999 - 2006 Chevrolet Silverado / GMC Sierra

Crew Cab

Thank you for choosing a JL Audio Stealthbox

for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox

installed by your authorized

JL Audio dealer. The installation professionals employed by your dealer have the necessary

tools and experience to disassemble and reassemble your vehicle properly. Also, keep in

mind that your warranty coverage extends to two (2) years if your system is installed

or approved by your authorized JL Audio dealer. If you prefer to perform your own

installation, please read this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox

be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T e P 1
Lower both sides of the rear seating.

Remove the jack (A), jack tools (B) and the rear window
sill plate (C).

Continued on Next Page

S T e P 2
With a Phillips screw driver, remove the two screws that
secure the passenger’s side c-pillar to the rear wall.

S T e P 3
Pull off the passenger’s side rear door sill plate.

SB-GM-SLVCRW/10W1v2_INSTR_SKU#011173

OUT

eSTIMATeD TIMe:

2-3 HOURS