Phoenix Gold 65CS ユーザーズマニュアル

ELITE.65 Owner’s Manual

TWeeter Mounting

Specifications

T/S Parameters:

ELITE.65cs

Re (Dcr)

3.6

FS (Hz)

Sd (SqM)

.0135

BL TM

5.5

Qms

5.38

Qes

.607

Qts

.545

Vas (liters)

13.24

Cms (uM/N)

581.08

Mms (gms)

15.26

Specifications:

ELITE.65cs

RMS Power Handling

150 watts

PEAK Power Handling

300 watts

Nominal Impedance

4 ohms

Tweeter HP Acoustical Crossover

3.5kHz @ 24dB (LnkRly)

Midrange LP Acoustical Crossover

2.95kHz @ 12dB (BTW)

*Midrange Driver Only

**Specifications subject to change

FEATURES:
• 25mm Silk Dome Tweeter
• Fully Machined Aluminum Tweeter Housing
• Dampened Polypropylene Cone
• Smooth Termination Dual Roll Rubber Surround
• Powder Coated Diecast Aluminum Basket
• Custom Tooled Crossover Housing with Direct Wiring Con-
nections
• Audiophile Crossover with Tweeter and Midbass Adjustments
• Two Stage Light Bulb Tweeter Protection Circuitry
• Integrated Phase Plug
• Interwoven Tinsel Leads
• High Temperature CAE/CAD Motor Structure

Installation Instructions:

1. Find a proper mounting location that is flat and has a mounting depth
clearance of roughly 21mm.
2. Cut a 47mm mounting hole in the door panel or mounting baffle.
3. Mount and secure the tweeter to the door panel or baffle using the
threaded retaining nut.
4. Connect the tweeter wires to the amplifier.

TWEETER WIRING NOTE:

BLACK = POSITIVE (+)

BLACK W/WHITE STRIPE = NEGATIVE (-)

(Mounting and Physical Dimensions are located on the back page)

Threaded Retaining Nut

Mounting Baffle Area

One Piece Aluminum Housing

Note on Fully Active Crossover Systems: For the best performance we

always recommend the use of the provided passive crossovers with an

external high pass electronic crossover usually located on the amplifier

or headunit. The passive crossover design is extremely complex as

it “blends” and “smoothes” the tweeter and midrange’s response and

impedances together.
Running the system fully active with an external electronic crossover

(instead of the passive crossovers) for the tweeter and midrange

eliminates all this smoothing and transitional circuitry. The reality is that it

almost guarantees worse performance unless the system is perfectly EQ’d

with precision crossover points. It also eliminates the tweeter protection.

Unless you are sound quality and tuning expert, using the provided

crossovers will deliver the best performance.