Precision Power PC.18DS プリント

ページ / 2
WWW.PRECISIONPOWER.COM 
 
Thank you for choosing PrecisionPower
 
woofers. Designed and 
engineered in the USA, this product combines innovative technol-
ogy with the finest materials to consistently deliver 
Absolutely State 
of the Art
™ performance, sound quality, reliability, and value. This 
  
PrecisionPower
 
product reflects our commitment to offer you 
unparalleled performance and quality for years of dependable ser-
vice and listening enjoyment. 
Features, Parameters, & Dimensions 
series wired  
PC.15DS 
PC.18DS 
Fs (Hz) 
48.02 35.99 
Qms  
7.247 6.391 
Vas (ft³)  
2.184 5.329 
Cms (mm/N)  
0.0698 0.0674 
Mms (g)  
157.4 290 
Rms (kg/s)  
6.555 10.27 
Xmax (mm)  
2 1.5 
Xmech (mm) 
17 16.5 
Piston Diameter (in) 
14.1 16.69 
Sd (in²)  
122.45 194.68 
Qes  
0.424 0.521 
Re (
Ω) 
7.2 7.2 
Z (
Ω) 
8 8 
BL (Tm)  
28.41 31.76 
Rms Power (watts) 
1,200 1,600 
Qts  
0.4 0.482 
NO (%) 
1.562 1.306 
1w/1m SPL (dB) 
93.96 93.18 
2.8V SPL (dB) 
94.54 93.31 
Voice Coil Diameter (in) 
3” 4” 
Impedance (
Ω) 
DVC 4
Ω DVC 
4
Ω 
M-vd (ft.
3
0.27 0.43 
Overall Diameter (in.) 
15.5” 18.25” 
Overall Height (in.) 
7.25” 9.625” 
Cutout Diameter (in.) 
14.125” 16.75” 
Mounting Depth (in.) 
6.75” 8.875” 
Cast Aluminum Basket  
Pressed Paper Cone 
Aluminum Phase Plug 
4 Layer Voice Coil 
Aluminum VC Former 
Dual Conex Spiders 
Reinforced Foam Surround 
Compression Terminals 
WWW.PRECISIONPOWER.COM 
 
Included in this manual are a number of different enclosure sugges-
tions. These are by no means the only enclosures to use, but they 
provide a starting point to determine the correct enclosure for your 
needs many factors must be addressed (amount of power, vehicle, 
placement, crossovers, etc) Therefore, as always PrecisionPower 
recommends that your subwoofer be installed by an authorized 
PrecisionPower 
dealer. 
Enclosure Dimensions 
All enclosures should be made of .75” (3/4”) material only. When 
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the 
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume 
unless you plan on adding a substantial amount of bracing. For 
added performance, applying a coat of fiberglass resin to the interior 
walls will greatly improve sealing the enclosure. Adding a thin layer 
of poly-fill will improve response by smoothing out reflections 
within the enclosure. 
Enclosure Construction 
Enclosure Recommendations 
PC.15DS High Tuned Ported 
PC.15DS Low Tuned Ported 
Vol. 
(ft.
3
Dimensions 
(H x L x D) 
Port 
(dia. x L) 
Freq. 
(Hz) 
Vol. 
(ft.
3
Port 
(dia. X L) 
Freq. 
(Hz) 
-3dB 
(Hz) 
3.50  18x23.75x18  (4) 4”x10”  56.3 
3.50 
(2) 4”x10”  40.8  40.1 
4.00 
18x27x18 
(4) 4”x10”  52 
4.00 
(2) 4”x10”  33.1  34.1 
4.50  18x30.25x18  (4) 4”x10”  48.5 
4.50 
(2) 4”x10”  28.4  31.2 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
PC.18DS High Tuned Ported 
PC.18DS Low Tuned Ported 
Vol. 
(ft.
3
Dimensions 
(H x L x D) 
Port  
(dia. X L) 
Freq. 
(Hz) 
Vol. 
(ft.
3
Port  
(dia. X L) 
Freq. 
(Hz) 
-3dB 
(Hz) 
4.00  20”x21.75”x20”  (5) 4”x15”  53.2 
4.00 
(3) 4”x15”  40.4  42.2 
5.00  20”x27”x20”  (5) 4”x15”  46 
5.00 
(3) 4”x15”  35.3  37.8 
6 00  20”x32”x20”  (5) 4”x15”  41.3 
6.00 
(3) 4”x15”  31.8  35.2 
Dimensions 
(H x L x D) 
18x23.75x18 
18x27x18 
18x30.25x18 
 
 
Dimensions 
(H x L x D) 
20”x21.75”x20” 
20”x27”x20” 
20”x32”x20” 
-3dB 
(Hz) 
48.9 
45.4 
42.7 
 
 
-3dB 
(Hz) 
47.3 
41.2 
37.3