Panasonic X60G series ユーザーズマニュアル

 Provides a dynamic enhancer of width to simulate 
improved spatial effects.

 Automatically regulates large sound level differences 
between channels and inputs.

 Adjusts the volume of each individual channel or input 
mode.

 Compensates for the low frequency sound due to the 
distance between the speakers and the wall.

● 

 If the back space between the TV and wall is within 
30 cm, [Up to 30cm] is recommended.

● 

 If the back space between the TV and wall is over 
30 cm, [Over 30cm] is recommended.

 Selects multiplex sound mode. (if available)
 [Stereo]: Use this normally.
 [Mono]: When stereo signal cannot be received.
 [M1] / [M2]: Available while mono signal is transmitted.

 SPDIF: A standard audio transfer file format
 Selects the initial setting for digital audio output signal 
from DIGITAL AUDIO OUT and HDMI2 (ARC function) 
terminals.
 [Auto]: Dolby Digital is output as Dolby Digital Bitstream. 
HE-AAC and MPEG are output as PCM. DTS is output 
as DTS.
 [PCM]: Digital output signal is fixed to PCM.

● 

 ARC (Audio Return Channel): A function of digital audio 
output using HDMI cable

● 

 For video contents of Media Player (p. 18)

 

 Selects to fit the input signal. (p. 25)
 [Digital]: When sound is carried via the HDMI cable 
connection
 [Analogue]: When sound is not carried via the HDMI-DVI 
adaptor cable connection

● 

 For HDMI input

 Resets the current Sound Mode to the default settings.

 Sets the duration of time until the TV automatically goes 
into Standby mode.

 Automatically turns the TV to Standby mode for energy 
saving when no operation is performed for 4 hours.

● 

 Automatic input switching with the connected 
equipment affects this function and time-count will be 
reset.

● 

 The notification message will appear 3 minutes before 
going into Standby mode.

 Automatically turns the TV to Standby mode to prevent 
unnecessary power consumption when no signal is 
received and no operation is performed for 10 minutes.

● 

 The notification message will appear 3 minutes before 
going into Standby mode.

 Automatically sets the TV to the most suitable energy-
saving mode.
 The concerned items and their current settings are 
displayed. Select [Set to Eco] to set them to the energy-
saving settings at once.

 Applies access control for channels or inputs to prevent 
unwanted access. (p. 17)

 

 Skips unwanted channels or edits channels. (p. 16)

 

 Automatically searches for receivable channels. (p. 16)

 

 Searches for channels manually. (p. 17)

 

 Changes language for on-screen displays.