Sharp LC-32L400X ユーザーズマニュアル

Ordinarily you can easily adjust the picture as 
necessary to change image position using Auto sync. 
In some cases, however, manual adjustment is needed 
to optimise the image.

Centres the image by moving it to the left 
or right.

Centres the image by moving it up or 
down.

Adjusts when the image fl ickers with 
vertical stripes.

Adjusts when characters have low contrast 
or when the image fl ickers.

• For resetting all adjustment items to the factory preset 

values, press 

a/b to select “Reset”, press ENTER, press 

c/d to select “Yes”, and then press ENTER.

• Images may not be displayed properly depending on the 

settings and/or input signals.

• Some input signals may have to be registered 

manually to display properly.

• The pairs of input signals (resolutions) in the list below 

are not distinguishable when received. In such case, 
you have to set the correct signal manually. After 
setting once, it will display when the same signal 
(resolution) is input again.

 1280 

g 768 

1360 

g 768

H Audio only
When listening to music from a music programme, you 
can set the display off and enjoy audio only.

Audio is output without screen image.

Both screen images and audio are output.

• When you make operations that change the picture on the TV 

such as by changing the input source, the Audio only function 
is set to “Off”.

H Game play time

This function displays the elapsed game time so you 
do not lose track of the time.
To display the elapsed time, select “GAME” under
“AV mode” for the input mode of the terminal connected 
to the game console before starting the game.

The elapsed time is displayed every
30 minutes when you switch to GAME 
mode in external input mode.

Hides the time.

H Colour system
You can change the colour system to one that is 
compatible with the image on the screen. (Auto, PAL, 
SECAM, NTSC 3.58, NTSC 4.43, PAL-60)

• If “Auto” is selected, colour system for each channel is 

automatically set. If an image does not display clearly, select 
another colour system (e.g. PAL).

• “Colour system” is selectable only when inputting an 

S-VIDEO or composite signal.

H Version up

This function is only for service personnel to use for 
software updates.

H Fine sync. (PC input mode only)

Auto sync.
This function enables the screen to be automatically 
adjusted to its best possible condition when the 
analogue terminals of the TV and PC are connected 
with a commercially available RGB cable, etc.

• Auto sync. is likely to succeed when an input PC image has 

wide vertical stripes (e.g. pattern with high contrast stripes, 
or cross-hatched). 

  It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on before 

starting Auto sync.

LC32L400X_pg10-17_EN.indd   15

LC32L400X_pg10-17_EN.indd   15

29/07/10   09:35:10 AM

29/07/10   09:35:10 AM