MotoSAT 901NOMAD 2IM ユーザーズマニュアル
27
• When the software has been loaded, you will again receive the local> prompt.
• Type default at this prompt, then press the ENTER button.
• Type default at this prompt, then press the ENTER button.
YOUR NOMAD 1 or 2 HAS NOW BEEN UPGRADED!
YOU MUST NOW RUN A TEST DISH IN ORDER TO ENSURE PROPER
FUNCTIONALITY.
• Nomad 1 Test Dish Procedure
You will need to run a TESTDISH. Do this by turning off the nomad, placing
Switch 1 in the on or up position, turning on the nomad, and waiting for
the test dish to finish. Turn off the nomad, change Switch 1 back to the off
or down position and turn the nomad back on.
You will need to run a TESTDISH. Do this by turning off the nomad, placing
Switch 1 in the on or up position, turning on the nomad, and waiting for
the test dish to finish. Turn off the nomad, change Switch 1 back to the off
or down position and turn the nomad back on.
BE SURE TO HAVE THE 3
RD
SWITCH UP IF THE DISH YOU ARE USING HAS A
SKEWABLE FACE!
• Nomad 2 Test Dish Procedure
Simply press the SEARCH AND STOW BUTTONS AT THE SAME TIME. This will run a test
dish on your system.
Simply press the SEARCH AND STOW BUTTONS AT THE SAME TIME. This will run a test
dish on your system.
1955 South Milestone Dr. Salt Lake City, UT 84104
www.motosat.com
1.800.247.7486