Sharp LC-32DH57E ユーザーズマニュアル
15
Connecting external devices
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
Connecting an amplifier with digital
audio input
audio input
DIGITAL AUDIO IN
Optical audio cable
u
E
Connecting an amplifier with
analogue audio input
analogue audio input
AUX1 IN
L
R
AUX OUT
L
R
Audio cable
v
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
Go to “MENU” > “Option” > “Digital Audio Output” > select “PCM” or “Dolby Digital”.
NOTE
When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When
set to “PCM”, PCM is output no matter what audio formats are received.
Some audio formats such as HE-AAC cannot be output as Dolby Digital.
set to “PCM”, PCM is output no matter what audio formats are received.
Some audio formats such as HE-AAC cannot be output as Dolby Digital.
E
•
•
Inserting the CA Card into the CI Module
Carefully insert the CI Module in
the CI slot with the contact side
forward.
The logo on the CI Module must
be facing outward from the rear
of the TV.
the CI slot with the contact side
forward.
The logo on the CI Module must
be facing outward from the rear
of the TV.
1
2
Checking CI Module information
Go to “MENU” > “Digital Setup” > “CI Menu”.
The content of this menu depends on the provider of the CI Module.
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Make sure that the CI Module is properly inserted.
•
•