Kramer Electronics 910 ユーザーズマニュアル
KRAMER: SIMPLE CREATIVE TECHNOLOGY
910 Commands in Protocol 3000
20
10 910 Commands in Protocol 3000
This RS-232/RS-485 communication protocol lets you control the machine
from any standard terminal software (for example, Windows
®
HyperTerminal Application) and uses a data rate of 115200 baud, with no
parity, 8 data bits, and 1 stop bit.
This section describes all commands sent to the 910. For an explanation of
This section describes all commands sent to the 910. For an explanation of
the syntax and use of Protocol 3000, see
Section 10
10.1 Help Commands
Command
Syntax
Response
Protocol handshaking
#CR
~OKCRLF
10.2 Device Initiated Messages
Command
Syntax
Start message
Kramer Electronics LTD. , Device Model Version
Software Version
Switcher actions:
Audio channel has switched (breakaway mode)
Audio channel has switched (breakaway mode)
AUD IN>OUT
10.3
26B
Result and Error Codes
Syntax
Command ran successfully, no error.
COMMAND PARAMETERS OK
Protocol Errors:
Syntax error
Syntax error
ERR001
Command not available for this device
ERR002
Parameter is out of range
ERR003
Unauthorized access (command run without the
matching login).
ERR004