Sony XDP-210EQ ユーザーズマニュアル
11
EN
Troubleshooting guide
The following check help you remedy most problems that you may encounter with you unit.
Before going through the checklist below, check the connection and operating procedures.
Before going through the checklist below, check the connection and operating procedures.
Cause/Solution
The ground lead is not securely connected. Ground the lead
securely to a metal part of the car.
securely to a metal part of the car.
Check the battery voltage (10.5 — 16 V).
The power connecting leads are run too close to the RCA pin
cords. n Keep the leads away from the cords.
cords. n Keep the leads away from the cords.
The RCA pin cords are run too close to other electrical cables of
the car. n Keep the cords away from the cables.
the car. n Keep the cords away from the cables.
The ground lead is not securely connected. n Ground the lead
securely to a metal part of the car.
securely to a metal part of the car.
The POWER indicator lights up when the master unit turns on.
n Check the amplifier and speaker connections.
n Check the amplifier and speaker connections.
The POWER indicator does not light up when the master unit
turns on. n Check the BUS cable, RCA pin cord and optical
cable connections.
turns on. n Check the BUS cable, RCA pin cord and optical
cable connections.
Problem
The POWER indicator does not
light up.
light up.
Alternator noise is heard.
No sound
Additional Information