Interfire Audio G1-3000 ユーザーズマニュアル

1. After reading precaution, decide where you are going to install the unit. Also, see Fig.1.

2. Once the location has been determined, place the amplifier into position. Using a felt tip 
    pen or pencil mark the four holes to be drilled for mounting. NEVER use the amplifier as 
   a template for drilling. It is very easy to damage the amplifier surface in this manner.

3. Remove amplifier. Drill four 3.5 m/m holes into mounting surface. If you want to mount
    

4. If possible, test the system to ensure it is operating correctly before final mounting of 
    

5. 

FIG.1

2

Mount the amplifier using the supplied 4 self tapping screws.

the amplifier to MDF or wood panel, drill four 3.0m/m diameter holes into mounting surface. 

the amplifier.

Self Tapping Screws