Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Marantz
  4. AV7701
  5. ユーザーズマニュアル

Marantz AV7701 ユーザーズマニュアル

ダウンロード
ページ / 186
102
Playback
1
Press 
ZONE SELECT
 to switch 
“ZONE2” or “ZONE3”.
Input source 
select buttons
2
Press 
ON/STANDBY 
X 
to turn 
on the ZONE2 or ZONE3 power.
• Also press input source select button when 
in standby mode, the power turns on.
• When 
ON/STANDBY 
X
 is pressed, ZONE2 
or ZONE3 turns off.
• Power in ZONE2 or ZONE3 can be turned 
on or off by pressing 
ZONE2 ON/OFF
 or 
ZONE3 ON/OFF 
on the main unit.
3
Press the input source select 
button to select the input source 
to be played.
The audio signal of the selected source 
is output to ZONE2 or ZONE3.
When power for both MAIN ZONE and ZONE2 is set to ON, power of 
the MAIN ZONE only can be turned off. In Step 1, press 
ZONE SELECT
 
to select “MAIN” and then press 
ON/STANDBY 
X
.
Adjusting the volume
Use 
VOLUME 
df
 to adjust the volume.
GAdjustable rangeH  0  –  40  –  98
(When the “Scale” (
GAdjustable rangeH  – – –   –79dB  –  –40dB  –  18dB
(When the “Scale” (
) is set to “70 
(–10dB)”.
Turn 
VOLUME
 after pressing 
ZONE SELECT
 on the main unit to adjust 
the sound volume.
Turning off the sound temporarily
Press 
MUTE 
:
.
The sound is reduced to the level set at “Mute Level” (
) 
in the menu.
• To cancel, either adjust the volume or press 
MUTE 
:
 again.
• The setting can also be cancelled by adjusting the volume or turning 
off the ZONE2 or ZONE3 power.
You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2 
Setup” or “ZONE3 Setup” (
) in the menu.
Sleep timer function
• This is convenient for viewing and listening while going to sleep in 
ZONE2 or ZONE3.
• The sleep timer function can be set by zone. 
1
Press 
ZONE SELECT
 to switch 
“ZONE2” or “ZONE3”.
2
Press 
SLEEP
 and display the time 
you want to set.
• If 
SLLEP 
on the main unit is pressed, 
the same function as with the remote 
control unit can be obtained.
• The time switches as shown below each time 
SLEEP
 is pressed.
Off
10 min
20
30
40
50
60
80
70
90
100
110
120
To confirm the countdown time before putting the 
unit to sleep
Press 
SLEEP
.
“Z2 Sleep : 
zmin” or “Z3 Sleep : zmin” appears on the display.
 
z  Countdown time
To cancel the sleep timer
Press 
SLEEP
 to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby 
mode or the ZONE2 or ZONE3 power is turned off. 
NOTE
The sleep timer function cannot turn off the power of devices 
connected to this unit. To turn off the power of those connected 
devices, set up sleep timers on the connected devices themselves.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
DVD