Marantz AV7701 ユーザーズマニュアル

113

Dynamic EQ
Solve the problem of 
deteriorating sound quality 
as volume is decreased 
by taking into account 
human perception and 
room acoustics. Works with 
MultEQ® XT.

On : Use Dynamic EQ.
Off : Do not use Dynamic EQ.

•

 is displayed when set to “On”.

• This can also be set by pressing 

 on the main unit.

Each time 

 is pressed, the setting is changed as shown 

below.

On

Off

When the menu “Dynamic EQ” setting is “On”, it is not possible to do 
“Tone Control” (

) adjustment.

Reference Level Offset
Audyssey Dynamic EQ® is 
referenced to the standard 
film mix level. It makes 
adjustments to maintain 
the reference response 
and surround envelopment 
when the volume is turned 
down from 0 dB. However, 
film reference level is not 
always used in music or 
other non-film content. 
Dynamic EQ Reference 
Level Offset provides three 
offsets from the film level 
reference (5 dB, 10 dB, and 
15 dB) that can be selected 
when the mix level of the 
content is not within the 
standard. Recommended 
setting levels are shown at 
right.

0dB (Film Ref) : This is the default setting and should be used when 
listening to movies.
5dB : Select this setting for content that has a very wide dynamic range, 
such as classical music.
10dB : Select this setting for jazz or other music that has a wider dynamic 
range. This setting should also be selected for TV content as that is usually 
mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material 
that is mixed at very high listening levels and has a compressed dynamic 
range.

 Setting is enabled when “Dynamic EQ” is “On” (

Dynamic Volume
Solve the problem of large 
variations in volume level 
between TV, movies and 
other content (between 
quiet passages and 
loud passages, etc.) by 
automatically adjusting to 
the user’s preferred volume 
setting.

Heavy : Most adjustment to softest and loudest sounds.
Medium : Medium adjustment to loudest and softest sound.
Light : Least adjustment to loudest and softest sounds.
Off : Do not use “Dynamic Volume”.

•

 is displayed when set to “Heavy”, “Medium” or “Light”.

• If “Dynamic Volume” is set to “Yes” in “Audyssey®  Setup” 

), the setting is automatically changed to “Medium”.

• This can also be set by pressing 

 on the main unit.

Each time 

 is pressed, the setting is changed as shown 

below.

Off

Heavy

Medium

Light

Audyssey DSX®
Provides more immersive 
surround sound by adding 
the new channels.

On–Height– : Turn on A-DSX processing for height expansion.
On–Wide– : Turn on A-DSX processing for wide expansion.
Off : Do not set Audyssey DSX®.

 This can also be set by pressing 

 on the main unit.

Each time 

 is pressed, the setting is changed as shown below.

Off

On–Height–

On–Wide–

“Audyssey DSX®” cannot be configured if the HD Audio source being 
played includes Front height and Front wide channels. In this case, the 
respective channels are played back using the input signals.

v See overleaf

DVD