Marantz AV7701 ユーザーズマニュアル

139

Add New Feature
Display new features that 
can be downloaded to 
this unit and perform an 
upgrade.

In cases where it is not 
possible to connect to the 
network after adding a 
new function, connect to 
the network again using 
“Network” (

).

Upgrade Package : Display the items to be upgraded. 
Upgrade Status : Display a list of the additional functions provided by 
the upgrade.
Upgrade Start : Execute the upgrade process.
When the upgrade starts, the STANDBY indicator becomes red and the 
menu screen is shut down. During the upgrade, the amount of upgrade 
time which has elapsed is displayed.
• If the upgrade is not successful, an error message identical to those in 

“Update” will appear on the display. Check the settings and network 
environment and then perform the upgrade again.

 See the marantz website for details about upgrades.

When the procedure is complete, “Registered” is displayed in this 
menu and upgrades can be carried out. If the procedure has not been 
carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out 
the procedure.
The ID number can also be displayed by pressing and holding the main 
unit’s 

 and 

o

 for at least 3 seconds.

• In order to use these functions, you must have the correct system requirements and settings for a 

).

• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/

upgrading procedure to be completed.

• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/

upgrading is completed. Furthermore, there may be cases where backup data is reset for the 
parameters, etc., set on this unit.

• If the update or upgrade fails, press and hold the 

X

 

 on the main unit for more than 5 

seconds, or remove and re-insert the power cord. “Update retry” appears on the display and update 
restarts from the point at which update failed. If the error continues despite this, check the network 
environment.

• Information regarding the “Update” function and “Add New Feature” will be announced on the marantz 

web site each time related plans are defined.

• When usable new firmware is released with “Update” or “Add New Feature”, a notification message 

is displayed on the menu screen. When you do not want to be notified, set “Notifications” – “Update” 
(

) to “Off”.

Protect settings from inadvertent change.

On : Turn protection on.
Off : Turn protection off.

 When canceling the setting, set “Lock” to “Off”.

When “Lock” is set to “On”, the settings listed below can no longer be 
changed. Also, “Setup Locked!” is displayed if you attempt to operate 
related settings.
• Setup menu operations

DVD